DESCRIPTION

High performance cold trap completely V2A large KF ISO-K100-Z

Cold Trap, two Sections

A special version is the two-section cold trap. It has an ISO-K 100 flange as the connection part
This type of cold trap enables the condensation area to be separated from the upper section of the cold trap
This ensures that the removal of the condensation and the cleaning of the cold traps can be carried out very easily
This version is also suitable for when a cold trap has to be permanently installed inside an apparatus so that only the lower section of the cold trap has to be removed in order to empty out the condensation.
The ISO-K 100 flange connecting piece is secured with 4 ISO-K-claw clamp stainless steel and this is included in our scope of delivery

Applications

versions

KF NW25 = Small flange NW25
special dimensions
special connections

Advantages

baffles for optimized condensation
made of stainless steel 1.4301 (1.4404 on request)
good chemical resistance
good thermal resistance
simple low-cost design
quick exchange is possible
two sections

Cold traps / cold fingers

Hence different materials may be present in the gas stream (e.g., water/solvent/acid or alkali containing gases), the condensation temperature of the material to be condensed must be considered first. Having a cold trap, the material made off (glass or metal) and the geometry of the cold trap play an important role regarding the performance of the cold trap. In order to increase the performance of cold traps, these are sometimes provided with integrated baffles, so that the gas is more swirled in the condensation space and thus better condensation can take place on the cold inner wall of the cold trap

In general, it should be noted that the liquid used for cooling (LN2 or CO2) should be at least 50 ° C colder than the condensation temperature of the substance that you want to condensate out of the gas stream. If you would like to filter e.g. a solvent such as methanol (melting point -98 ° C) or acetone (melting point -95 ° C) out of a gas stream, you will need LN2 (about -196 ° C) as a coolant to achieve sufficient cooling capacity in the cold trap. For water, the melting point is 0 ° C which means that a mixture of CO2 and acetone (about -77 ° C) would be sufficient for water vapor

In order to obtain a constant performance of a cold trap / cold finger, the coolant level (LN2) inside the Dewar flask also must be kept constantly on a high level. This can be achieved with automatic LN2 level control. By such an automatic LN2 level controller, the cold trap / cold finger is always supplied with sufficient LN2 coolant, so that an optimal condensation performance of the cold trap / cold finger is guaranteed. For this purpose, complete LN2 level control systems for cold traps are offered

SPECIFICATIONS

Tecnial Data Cold trap completely KF ISO-K100-Z

 

Type	Condensate capacity	Colant capacity	with Dewar Type	cold finger connections	Art. No.
Cold trap KF ISO-K100-Z-33C	app. 1,5 l	16 l	33C	KF NW 25	17150
Cold trap KF ISO-K100-Z-DSS D250/450	app. 1,5 l	18 l	DSS-D250/450	KF NW 25	17151

Spare parts

 

Spare parts	Article No.
Cold finger S-K100-Z	17154
Dewar made of glass Type 33C	1244
Dewar made of stainless steel Type DSS-D250/450	2407
Plastic ring for Type 33	17155
Plastic ring for Type DSS-D250/450	17156
Claws for S-K100-Z	17159
Centerring ring ISO-K100	17160

__________________________________________________________________________________________

Tecnial Data Cold trap completely with CO2 wire bracket KF ISO-K100-Z-CO2

 

Type	Condensate capacity	Colant capacity	with Dewar Type	cold finger connections	Art. No.
Cold trap ISO-K100-Z-33CAL-CO2	app. 1,5 l	16 l	33CAL	KF NW 25	17152
Cold trap ISO-K100-Z-DSS D250/450-CO2	app. 1,5 l	18 l	DSS D250/450	KF NW 25	17153

Spare parts

 

Spare parts	Article No.
Cold finger S-K100-Z	17154
Dewar made of glass Type 33CAL	1254
Dewar made of stainless steel Type DSS-D250/450	2407
Plastic ring for Type 33	17155
Plastic ring for Type DSS-D250/450	17156
CO2 wire bracket for Type 33	17157
CO2 wire bracket for Type DSS-D250/450	17158
Claws for S-K100-Z	17159
Centerring ring ISO-K100	17160